Home > Products > Audio & Visual > Sound Bars > YSP-4100

YSP-4100

RRP: $2,499.00

Using the same technology as the YSP-5100, the YSP-4100 delivers surround sound without the need for wires or speakers in your lounge room. Its slim design also caters for wall mounting without sitting too far out from the wall, again matching your flat panel television. Slightly smaller than the YSP-5100, it matches perfectly with 42” televisions.

The colours and finishes shown may vary from those on the actual products.

Features

Hear sound coming from your walls!

Yamaha Sound Projectors (YSP) work by using your walls as speakers. The YSP-4100 acoustically calibrates your room and works out where to bounce audio from the walls to ensure you receive the best quality surround sound.

More Features

Technology

HDMI

HDMI (High-Definition Multimedia Interface) is the first industrysupported, uncompressed, all-digital audio/video interface. Providing an interface between any source (such as a set-top box or AV receiver) and an audio/video monitor (such as a digital television), HDMI supports standard, enhanced or high-definition video as well as multichannel digital audio using a single cable. HDMI transmits all ATSC HDTV standards and supports 8-channel digital audio, with bandwidth to spare to accommodate future enhancements and requirements. When used in combination with HDCP (High-bandwidth Digital Content Protection), HDMI provides a secure audio/video interface that meets the security requirements of content providers and system operators. For further information on HDMI, visit the HDMI website
at “http://www.hdmi.org/”.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

View Products that use HDMI

CINEMA DSP Digital

･ Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best felt in a theater having many speakers designed for acoustic effects. Since home conditions, such as room size, wall material, number of speakers, and so on, can differ so widely, it is inevitable that there are differences in the sound heard. Based on a wealth of actually measured data, Yamaha CINEMA DSP provides the audiovisual experience of a movie theater in the listening room of your own home by using the Yamaha original sound field technology combined with various digital audio systems.
･ The actually measured sound field data contain the information of the height of the sound images. CINEMA DSP 3D mode achieves the reproduction of the accurate height of the sound images so that it creates the accurate and intensive stereoscopic sound fields in a listening room.

View Products that use CINEMA DSP Digital

Compressed Music Enhancer

Yamaha employs sophisticated digital signal processing with exclusive algorithms to enable playback that improves the performance of compressed music formats, including MP3 and WMA. With the Compressed Music Enhancer, highs and especially lows are richer and smoother, bringing music back to life to be as close to the original as possible.

View Products that use Compressed Music Enhancer

Dolby TrueHD

Dolby TrueHD is an advanced lossless audio technology developed for high-definition disc-based media including Blu-ray Disc. Selected as an optional audio standard for Blu-ray Disc, this technology delivers sound that is bit-for-bit identical to the studio master, offering a high-definition home theater experience. Supporting bitrates up to 18.0 Mbps, Dolby TrueHD can carry up to 8 discrete channels of 24-bit/96 kHz audio simultaneously. Dolby TrueHD also remains fully compatible with the existing multichannel audio systems and retains the metadata capability of Dolby Digital, allowing dialog normalization and dynamic range control.
Dolby, Pro Logic, and the double-D symbol are registered trademarks of Dolby Laboratories.

View Products that use Dolby TrueHD

DTS HD Master Audio

DTS-HD Master Audio is an advanced lossless audio technology developed for high-definition disc-based media including Blu-ray Disc. Selected as an optional audio standard for Blu-ray Disc, this technology delivers sound that is bit-for-bit identical to the studio master, offering a high-definition home theater experience. Supporting bitrates up to 24.5 Mbps for Blu-ray Disc, DTS-HD Master Audio can carry up to 7.1 discrete channels of 24-bit/96 kHz audio simultaneously. Supported by HDMI version 1.3 and designed for the optical disc players and AV receivers/amplifiers of the future, DTS-HD Master Audio also remains fully compatible with the
existing multichannel audio systems that incorporate DTS Digital Surround.
DTS is a registered trademark and the DTS logos, Symbols, DTS-HD and DTS-HD Master Audio are trademark of DTS, Inc.

View Products that use DTS HD Master Audio

Air Wired

AirWired technology uses lossless (uncompressed) signal transmission to achieve wireless sound quality that is as good as wired, and perfect synchronisation between sound and image for movies

View Products that use Air Wired

IntelliBeam

This unit creates a sound field by reflecting sound beams on the walls of your listening room and by broadening the cohesion of all the channels. Just as you would arrange the speaker position of other audio systems, you need to set the beam angle to enjoy the best possible sound from this unit. This unit employs the beam optimization and sound optimization features with the aid of the supplied IntelliBeam microphone, allowing you to avoid troublesome listening-based setup and achieving highly accurate sound adjustments that best match your listening environment. We call these two features “IntelliBeam” generically.

View Products that use IntelliBeam

Made for iPod

“Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
iPod/iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.

View Products that use Made for iPod

YSP Technology

Digital Sound Projectors use Yamaha’s proprietary technology to bounce sound focused into beams off walls, producing true multi-channel surround sound.

The primary advantage of the YSP Series is that simply placing a unit in the front of a room provides true surround sound, which you hear from the front and rear and also the left and right. Its key technologies are the production of sound beams via the control of multiple built-in speakers, and IntelliBeam, which automatically sets the optimum sound field for the size and shape of the room. Thanks to these two technologies, the YSP Series can reproduce 7.1-channel surround sound that is natural with an expansive feeling, qualities that cannot be achieved by virtual surround systems.

Beam control technology creates sound beams.

The front surface of a YSP unit features a number of compact beam speakers* installed in orderly rows. Control of each of these speakers on a time axis by individual amps creates five sound beams. Bouncing these sound beams off walls creates a surround environment.

* YSP-2200: 16; YSP-4100, YSP-5100: 40

Superimposing sound waves from the compact speakers installed in a row and adjusting their direction by delay control causes the axes of the sound waves to converge in a specified direction.

How the sound beams are created.

Sound produced from the speakers is transmitted radially from the sound source, like an expanding ripple (Fig. 1).

The sound waves from two speakers are superimposed, creating interference (Fig. 2).

If the number of speakers in adjoining locations is increased, the sound waves are superimposed even more, so the sound is transmitted as a single strong wave. This is a sound beam (Fig. 3).

By using a processor (dedicated Yamaha LSI) to control the times when each speaker produces sound, the direction of the sound beams can be controlled (Fig. 4).

Controlling the directions of the beams to bounce them off the walls enables the sound to come from five directions: front left and right, rear left and right, and center. Models from the YSP-4100 and up create two phantom sound sources in addition to the five beams, to provide 7.1-channel surround sound.

Sound from the speakers is transmitted radially.

Ripples of sound from two adjacent speakers are superimposed, creating interference.

The ripples of sound are further superimposed, creating a single strong wave — a sound beam.

The timing of the sounds from each speaker are delayed, controlling the direction of the beams.

Time control

IntelliBeam automatically sets the listening environment best suited to the room.

When the microphone is placed at the listening position, it searches for the places suitable for reflecting the beams while it checks the size and shape of the room and the quality of the wall material, in order to automatically adjust the beam angle, the volume and the sound quality. This makes it easy to achieve the best surround sound environment.

Presence created by true surround.

YSP models achieve real multi-channel surround by, not virtually but actually, bouncing sound beams off walls. This provides three major benefits.

Natural ambience

YSP models naturally expand the sound radiated onto the walls, producing surround sound without the unnatural feeling of sound linkages between the channels.

Wide listening area

YSP models provide ideal family listening, because the listening area is wider than with conventional virtual surround sound.

Less individual differences and listening fatigue.

Ordinary virtual surround systems often sound different to different people because the surround sound is created artificially. This causes some people to become tired of listening after a certain amount of time. With YSP models, sound bounced off walls actually comes from behind the listeners, which means there is little difference in its effect between individuals, and people are unlikely to experience listening fatigue, even after long periods.

Front Surround System	Output Power	20 W / channel
Drivers	40 x 4 cm cone and 2 x 11 cm cone
iPod Compatibility via Yamaha Universal Dock	Yes
Bluetooth Compatibility via Bluetooth® Wireless Audio Receiver	Yes
CINEMA DSP	Yes
FM Tuner Built-in	Yes
Digital Audio Inputs	Yes
HDMI Interface	Yes
UniVolume	Yes
Center(Speaker) System	Dimensions (W x H x D)	1030 x 212 x 90 mm
Weight	10 kg
Subwoofer	Frequency Response	150 Hz to 20 kHz
Dimensions (W x H x D)	290 x 350 x 349 mm
Weight	11.5 kg