Yamaha AW2816 MIDI Remote Template

AW2816 --REMOTE --> PLG-150AN

Installation
This template is stored in bulk MIDI data format. To install the template, use a MIDI sequencer to send the "an.mid" bulk data file to the AW2816.

Feature Overview
This template allows you to remotely control the synthesizer parameters of the Yamaha PLG150-AN Plug-in Board via the AW2816.

Main Functions
Designed with ease-of-use in mind, this template assigns each PLG150-AN parameter (in the proper order relative to an analog synthesizer, VCO --> VCF --> VCA) to Remote Banks A through D.

Detailed Template Settings

AW2816		PLG150-AN
Window	Control	Remote controlled parameter
Remote A	ON 1	VCO1 SAW
	ON 2	VCO1 PULSE
	ON 3	VCO1 MIX
	ON 4	VCO1 VARI
	ON 5	VCO1 MLT SAW
	ON 6	PWM FEG
	ON 7	PWM LFO1
	ON 8	PWM VCO2
	FADER 1	VCO1 PITCH
	FADER 2	VCO1 FINE
	FADER 3	VCO1 SYNC PITCH
	FADER 4	PWM DEPTH
	FADER 5	PWM PW
	FADER 6	PWM EDGE
	FADER 7	SYNC DEPTH
Remote B	ON 1	VCO2 SAW
	ON 2	VCO2 PULSE
	ON 3	VCO2 SAW2
	ON 4	VCO2 MIX
	ON 5	VCO2 TRIANGLE
	ON 6	PWM FEG
	ON 7	PWM FEG
	ON 8	PWM LFO2
	FADER 1	VCO2 PITCH
	FADER 2	VCO2 FINE
	FADER 3	PWM DEPTH
	FADER 4	PWM PW
	FADER 5	PWM EDGE
	FADER 6	MIXER VCO1
	FADER 7	MIXER VCO2
	FADER 8	MIXER NOISE
Remote C	ON 1	VCF LPF 24
	ON 2	VCF LPF 18
	ON 3	VCF LPF 12
	ON 4	VCF BPF
	ON 5	VCF HPF 12
	ON 8	VCF BEF
	FADER 1	VCF CUTOFF
	FADER 2	VCF RESONACE
	FADER 3	VCF DEPTH
	FADER 4	VCA VOLUME
	FADER 5	VCA ATTACK
	FADER 6	VCA DECAY
	FADER 7	VCA SUSTAIN
	FADER 8	VCA RELEASE
Remote D	ON 1	LFO1 SINE
	ON 2	LFO1 TRIANGLE
	ON 3	LFO1 SQUARE
	ON 4	LLFO1 SAW
	ON 5	VCO2 S/H
	ON 6	SYNC OFF
	ON 7	SYNC VCO1 M --> S
	ON 8	SYNC VCO2 --> VCO1
	FADER 1	LFO1 SPEED
	FADER 2	LFO1 VCO1
	FADER 3	LFO1 VCO2
	FADER 4	LFO1 VCA
	FADER 5	LFO1 VCF
	FADER 6	LFP SPEED
	FADER 7	FM DEPTH
	FADER 8	DIST DRIVE

Setup

1.	Using a MIDI cable, connect the MIDI OUT/THRU jack of the AW2816 to the MIDI IN jack of the MIDI device in which the PLG150-AN is installed.
2.	Set the MIDI channel of the PLG150-AN to the same channel as the AW2816.